Suez Memtrex Pleated Filter Cartridges
Memtrex FE Cartridges
The inherently hydrophobic PTFE membrane is ideally suited for the filtration of compressed air and other process gases. Constructed in a clean room environment using thermal welding techniques, the MFE filters do not contain any adhesives or additives.
As part of the manufacturing process, the MFE filters are individually integrity tested. The effectiveness and purity of your filtration process is preserved.
MFE filters offer exceptional filtration characteristics, including reliable particle retention, and high purity in harsh process conditions. Typical applications include filtration of:
• Aggressive solvents such as alcohols, esters and ketones
• Corrosive acids and bases
• Vents/exhausts for autoclaves, fermenters, and storage tanks
• High purity chemicals and water used in electronics manufacturing
Memtrex FE-S Cartridge
Memtrex FE-S (MFE-S) filters are sterilizing grade cartridge filters for use in validated applications. The commitment to validation by SUEZ Water Technologies & Solutions is based upon the FDA Guidelines that we “establish documented evidence of assurance that a specific process will consistently produce a product meeting its predetermined specification and quality attributes.”
MFE-S filters are specifically designed for sterile chemical, air, gas and vent filtration. Typical applications include:
• Tank Venting
• Fermentation Air Supply
• WFI Tanks
Memtrex HFE Cartridge
Memtrex* HFE are made entirely from fluoropolymer materials including Halar (ECTFE). Halar is a trademark of Ausimont.), and PTFE. Halar is an industrial-grade fluoropolymer with excellent solvent resistance.
MHFE benefits of the edge lamination technology assuring a lower pressure drop and increasing flow rate. MHFE filters can withstand the harshest process conditions due to its construction using these highly resistant materials. MHFE deliver high flow rates and high purity results with absolute rated efficiencies and retention characteristics that outperform other filters.
MHFE all fluoropolymer filters offer outstanding performance in extremely harsh chemical environments. MHFE filters are manufactured and packaged in a cleanroom environment for assured cleanliness. Typical applications include:
Memtrex KM Cartridges
Memtrex KM filters are uniquely constructed for superior performance with SUEZ’s Nylon 66 membrane. MKM filters utilize all
polypropylene construction to assure chemical compatibility and applicability to the widest range of applications.
MKM filters are designed to ensure maximum downstream cleanliness. SUEZ Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested.
MKM filters have excellent chemical compatibility making them the ideal choice for a broad range of applications such as high purity water, strong solvents, photoresists and other critical process fluid systems. Typical applications include:
• Microelectronics ultrapure water filtration
• Filtration of positive photoresists
• Filtration of organic solvents
Memtrex MP Cartridges
Memtrex MP (MMP) filters, constructed with Hydrophilic polyethersulfone membranes and all polypropylene components, exhibit both enhanced throughput and reliable particle retention for superior performance in most applications. MMP filters are compatible with a broad range of chemicals and pH extremes. The low protein binding characteristics of the polyethersulfone membranes ensure that MMP filters are suitable in a variety of beverage, chemical and pharmaceutical applications.
Constructed using thermal welding techniques, the MMP filters do not contain any adhesives or additives, and individual integrity testing assures that MMP filters meet the exacting performance requirements of our customers.
MMP filters are suitable for a broad range of applications, including filtration of:
Memtrex MP-B Cartridge
Memtrex MP-B (MMP-B) filters offer a PES membrane specifically designed for beverage applications. MMP-B cartridge filters exhibit the low protein-binding, high flow rates, and high throughputs that are crucial for today’s demanding beverage process. Every filter is 100% integrity tested. You can rely on MMP-B filters to provide reliable filtration for all your beverage applications—bottled water, beer, wine, liquor, fruit juices, and fountain drinks.
Memtrex-MP-B filters are specifically designed for beverage filtration. Typical applications include final filtration of:
• Fruit Juices
• Bottled Water
Memtrex MP-E Cartridge
Memtrex MP-E (MMP-E) filters incorporate a modified asymmetric Polyethersulfone membrane with polypropylene supports and hardware for enhanced service life and cleanliness in UPDI water and other microelectronics applications.
The Electronics (E) Grade Memtrex-MP-E filters are manufactured utilizing a high-purity rinse on each and every filter to reduce TOC and trace metals below 5.0 ppb. This is ideal for final filtration on DI water pads and POU applications. These filters are also 100% integrity-tested to ensure reliable particle retention.
Memtrex-MP-E filters are specifically designed for the filtration of ultrapure semiconductor water. Typical applications include:
• UPDI Water Pad
• High Purity Chemicals
• Point of Use Applications
Memtrex MP-S Cartridge
Memtrex* MP-S filters are designed for final sterile filtration of biological and pharmaceutical products. The double-layer PES membrane provides low protein-binding, high throughput and broad chemical compatibility for your critical filtration processes.
Memtrex MP-S filters are specifically designed for sterile filtration of pharmaceutical and biological products. Typical applications include:
• Final Filtration of Drugs and Biologicals
• Final Filtration of Water for Injection
• Final Filtration of Pure Water for Dialysis
• LVPs, SVPs
• Tissue Culture Media
Memtrex NY Cartridges
Memtrex NY (MNY) filters are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large poresize membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to
increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.
MNY filters are designed to ensure maximum downstream cleanliness. SUEZ’s Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge
construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested.
MNY filters have excellent chemical compatibility making them the ideal choice for a broad range of applications such as high purity water, strong solvents, photoresists and other critical process fluid systems. Typical applications include:
• Filtration of pharmaceuticals intermediates
• Filtration of positive photoresists
• Final filtration of beverages
Memtrex PC Cartridge
Memtrex PC (MPC) filters’ unique polycarbonate track-etch membrane leads the market for precise filtration, broad chemical compatibility, and fast conductivity and TOC rinse-down in ultrapure water systems. MPC filters’ precise micron cutoffs and
very low pore sizes down to 0.05 micron provide you with high purity filtration for all of your critical electronic, chemical, and highly technical processes.
Memtrex PC filters are specifically designed for ultrapure filtration. Typical applications include:
• Pure Chemical Filtration
• Inks and Dyes
• Ultrapure Water Filtration
• Plating Solutions
Memtrex PM Cartridge
Memtrex PM (MPM) filters' 100% polypropylene construction offers low extractables, long service life, and broad chemical compatibility. Thermoplastic sealing techniques are used in the cartridge construction eliminating the need for glues or sealers which could leach contaminates. MPM filters are integrity testable. All components are made of FDA-acceptable materials and meet the test criteria for the USP24 Class VI 121˚C plastics.
MPM filters utilize high flow polypropylene membranes, capable of protecting your gas, air, and liquid processes with absolute ratings of 0.1 and 0.2 micron.
Memtrex PM filters are specifically designed for pure chemical filtration. Typical applications include:
• Vent and Process Air
• Etchants, Photoresists and Developers
• Solvents, Acids and Bases
• Ultrapure Chemicals